more

I forgot to add, I finished the fuel lines and connected them to the motor. a 5/16 pipe from the tank and fuel pump goes to the filter then the intake manifold. Then a 1/4" line returns from the manifold to the tank. I think it is close to standard for the B16 honda motor.

The vacuum lines were a little confusing at first. Some are not needed, but some are. I was missing a MAP sensor (didnt come with the B16 motor) and it should be hooked to the vacuum line on the throttle body (the smaller of the two fittings, the larger fitting is not used in the mini since it is for a honda smog/ fuel vapor system). The other vacuum line that is needed goes from the back of the intake manifold through the fuel pressure regulator cutoff solenoid and then to the fuel cutoff valve (that controls the fuel return line to the tank). The solenoid came attached to the same bracket the MAP sensor was bolted to. Ill add pictures later.